User login
User name:
Password:
Register  Forget password?
      Prouduct list
Preparation lines of Solid Welding Wire
Welding wire chemical copper coating lines
Wire drawing machines
Production lines of Flux-cored wire
Take-up and pay-off machines
Welding wire layer winding machine
Automatic Pail Packing Line
Combining productions
HSJ-500 Automatic Bulk Packine Line
    Product Show
 Wire drawing machines >> Pulley wire drawing machines >> 
 
    
Number:
000000001
Name:
Spec:
Memo:
Class:
Wire drawing machines
 
    Product Readme

WIRE DRAWING MACHINES

The drawing of the welding wire includes rough wire drawing and fine wire drawing.
Rough wire drawing process is to draw the 5.5 welding wire material processed through the wire rod pre-treatment into φ2.45 wire. The 560-series wire drawing machine is used; Fine wire drawing is to draw the φ2.45 wire to various types of welding wire(φ1.6,φ1.2,φ1.0,φ0.9,φ0.8). The 400-series wire drawing machine is used.
Currently the commonly used wire drawing machines in the market are pulley wire-drawing machines and straight-line drawing machines. Straight-line drawing machines include horizontal straight-line drawing machines and vertical straight-line drawing machine.
 
PULLEY WIRE DRAWING MACHINES
 
 
This machine are composed of several of several single block in parallel , which are controlled by the PLC programme. The speed of the machine is controlled by inverter. It can be used to draw metal wires including steel, aluminum, and copper etc. This machine is composed by structure members including capstan device, bridge device, die box, pulley device, cooling device, protective cover, and frame. The material of the capstan is ZG45 spray painting tungsten carbide. The surface is Mirror-surface treated and is rigid and wear without damaging the surface of the welding wire. The capstan adopts inner wall slit-type cooling and box direct cooling. which will provide sound effect .Additionally this wire drawing machines can be used with bobbin take-up machine or trunk type take-up machine.
 
TECHNICAL PARAMETERS OF PULLEY WIRE DRAWING MACHINES
 
Number
HL400
HL560
Diameter of Capstan(mm)
400
560
Maximum Strength of Inlet Wire(mpa)
~1100
~800-900
Drawing Time
6~8
6~8
Average Compression Ratio
21%
25%
Maximum Diameter of Inlet Wire(mm)
3.2
6.5
Minimum Diameter of Finished Product(mm)
0.6
2.3
Highest Drawing Speed(m/s)
~12
~6
Drawing Power(KW)
One block
11
18.5~22
Driving System
Single or double-stage belt
Paying Off Manner
Automatic damping wire paying off
Taking Up Manner
Wire taking up with constant tension controlled by inverter
Suitable Drawing Materials
Various metal wire, for example electrode, welding wire(gas shield welding wire, submerged arc welding wire, flux-cored wire etc);steel wire (medium and low carbon steel wire, stainless steel wire etc); wire and cable(copper wire, sluminium wire etc)etc.
 
Hits:6445  UpdateTime:2009-6-12 【Print】 【Close

Copyright 2007-2009 www.weldingwire.com.cn All rights reserved
Add:Zhengzhou,Henan,China Postcode:451482
Tel:+86-371-68743818 FAX:+86-371-68743808
E-mail:weldingwire@188.com